Cost of Waterjet Cutting
You will realize that so many people have fallen for waterjet cutting. You will easily realize that a good number of people appreciate the aspect of understanding the cost of waterjet cutting. It is necessary to understand that there are various costs incurred in running waterjet cutting processes. It is necessary to indicate that there are a number of variables as well as power requirements that will need to be taken into consideration. Water and abrasive will also come at a cost too. You need to understand that there are primarily six different configurations. They come with different expenses. This is what makes it necessary for you to understand some of the costs attracted by this waterjet cutting. They will every so often include the following.
There is a cost attached to water. You will actually find that this is what will cost you the least among all. This water will be effective in cutting as well as cooling. You will find that 3.5 dollars will every so often be used on a 1000 gallon. You will realize that you will have to spend about 1200 to 2500 dollars every year. It is imperative to mention that there will be a need for you to pay an extra amount for the sewer as well. This will often depend on your location. There are regions that will cost more than the others. It is necessary to understand that the intensifier pump will also have to be operated. This will often need power. You will realize that you will be required to pay in the range of 3700 to 9400 dollars each year for power. This will depend on your usage. These figures are actually premised on pumps that come with about 50 to 125HP.
There is also a cost attached to abrasive. It will definitely cost more than all the others. You will realize that there are usually two main types of garnets available. We often have the hard rock and the alluvial garnets. You will learn that hard rock is known to be sharper. It is for this reason that it will tend to cut faster. You will note that the alluvial garnet will be characterized by rounded grains. This is what will raise the cost of the hard rock. You will also need to focus on the expenses that come with the abrasive flow rate. It will often cost you between 26000 and 55000 dollars annually.
There is a need for you to consider the cost of wear and tear too. It is not uncommon to replace certain parts such as the orifice. There are also miscellaneous pump part costs. You can spend on them up to 32000 dollars each year.